Cracking and Settling Walkways and Entryways - Finished

What To Do With Cracking and Settling Walkways and Entryways

Here at Concrete Restorations, we always say no two projects are the same. Each project presents its own unique issues and characteristics, that we build on even if its negatives. What I mean by that is, you are going to have to often deal with negatives such as cracks and settling along with other potential structural issues.

Looking at this walkway and entryway, we have several issues going on here. First, we have spalling, which is where the surface or the finish of the concrete is flaking off in small but, substantial chips. This spalling is about the size of a dime and appears to be like a concrete rash.

This is somewhat uncommon for walkways because two things cause spalling which are, overworking the concrete in large pours, which walkways typically are not large pours or freezing which is most likely here. When concrete is being finished, the water in the concrete comes to the surface allowing the finisher to trowel the concrete to finish.

This moisture rises to the surface and is sitting on top of the concrete and if cold enough can freeze causing the concrete to be compromised structurally and eventually pop off in a phenomenon called spalling. The second issues here is cracking. The first photograph looking down the steps displays settling cracks on the second, third, and fourth steps as shown in the first photograph above.

There was also settling where the steps pulled away, where the tread and riser come together, and had to be re-bared and re-poured in the third photograph above between the porch and the walkway.  So there are some interesting issues on this project to find solution to and avoid what would typically be total replacement. However, if you are going to call your company Concrete Restoration System, you had better have solutions.

So the unique issues of this particular project are spalling, cracks and settling. So how do we deal with all the issues presented? To deal with the separation of the step, we demo sawed out a four-inch space where the step riser separated from the tread and drilled and set re-bar dowels to prevent future settling and poured new concrete. We then filled the spalling surface with epoxy as shown in photograph one.

We then took a right angle grinder and a crack chasing diamond wheel with a “V” shape blade to open up the cracks and filled them with epoxy and silica sand. We then re-opened those existing epoxied cracks again with the right angle grinder and crack chaser and began to carve a flagstone pattern into the entire step creating a unique flagstone look.

We also placed what are now joints into the risers of the step to create a look of placed cap stone as shown on the risers in the photograph above of the finished product.

To give these now created stones a natural stone like look, we installed our quartz epoxy system to obtain a grainy stone finish in a color selected by our client. The same process was used for the entryway or porch to achieve a one of a kind project that the client is absolutely thrilled with as illustrated above in our before and after photographs.

When we say no two projects are alike, we mean just that! After forty years in business here in the Denver area, we have proven ourselves to be uniquely creative taking each project and making it special for each and every client. Its just simply important!

If you want to find out more about our unique company or just want to talk with an expert about your special project, we encourage you to call the owner Daniel Yalacki at 303-435-3334 for a free consultation. We will make it fun and uniquely yours. Thank you for visiting our site and we look forward to serving you on your unique project!


This article was written by:

Daniel Yalacki Architect/Consultant/President

Concrete Restoration Systems LLC


If you would like us to help you with your project, please click here to schedule a free consultation for creative concrete solutions. If you can Imagine it, we can Create it!

new resurfaced driveway quartz system

Spalling and Deteriorated Concrete Driveway Resurfacing With Quartz System

How to save your worn driveway without replacing it


In Colorado, a spalling driveway is all too common. In fact, one out of every three driveways in Colorado has spalling or deteriorated concrete. Spalling is the flaking off of the concrete surface as shown in the photographs above. But a replacement is not always necessary.

Here at Concrete Restorations, we have developed several resurfacing systems to repair this type of damage without tear out and replacement. Beautiful decorative applications that are stronger and more durable than your existing concrete driveway. Here we shall discuss our exclusive quartz driveway system that is perfect for repairing and resurfacing your driveway along with walkways, entryway, and even patios.

This particular driveway was a real challenge due to the extent of spalling or deterioration damaged that had occurred over time. But no worries, we enjoy the challenge. On this project, the control joints, which are the tooled joints that divide the concrete into sections, were in pretty bad shape as well. Control joints are there in hopes that should the concrete crack, it will be in that joint and not across the concrete slab.

To restore this driveway, we must remove any concrete that is loose or deteriorated by whip gears and high-pressure water blasting. This process of blasting is illustrated in our video tab showing the flaking concrete flying off the concrete surface. Then we apply a self-leveling mortar over all of the spalling areas. Once repaired, we use a walk behind diamond concrete grinder to remove all excess mortar from the driveway to make it smooth.

We shall then fill the control joints with a high strength repair mortar. Then take a right angle grinder with a diamond crack chaser wheel in a “V” shaped blade and a long piece of siding as a guide, to put crisp new control joints throughout the slab. Now we have an excellent pallet to work on for our Quartz System.

Quartz is the fourth hardest mineral known to man below diamonds and is an excellent high traffic material. We combine the strength of quartz with high solid epoxies to create the most comprehensive driveway resurfacing system available in the marketplace today. We have an endless selection of colors about 3200 colors and a system that is sure to meet the most stringent requirements.

Combining beauty and durability is assured in this high-end application. If you would like to learn more and find out about the multiple alternative systems that are available then feel free to contact Dan Yalacki at Concrete Restoration Systems at 303-435-3334. We provide free consultation and would love to show you what all is available to you!


Article Posted January 10, 2018 by:

Daniel Yalacki President/Consultant

Concrete Restoration Systems


If you would like us to help you with your project, please click here to schedule a free consultation for creative concrete solutions. If you can Imagine it, we can Create it!